Wall putty is an essential material for achieving a smooth and durable finish on walls before painting. It fills cracks, evens out imperfections, and enhances paint adhesion. However, improper application can lead to issues like cracks, peeling, or uneven surfaces. To help you get the best results, we’ve compiled a list of common wall putty mistakes and how to fix them.
1. Skipping Surface Preparation
Mistake:
Many people apply wall putty directly without cleaning or priming the surface. Dust, grease, or loose particles can prevent proper adhesion, leading to peeling or flaking.
Solution:
- Clean the wall thoroughly with a wire brush or sandpaper to remove loose material.
-Wash the surface with water and let it dry completely.
- Apply a primer to improve adhesion before using wall putty.
2. Using Poor Quality Putty
Mistake:
Low-quality wall putty may not provide a smooth finish or long-lasting durability. It can crack easily and fail to protect the wall from moisture.
Solution:
Always choose high-quality wall putty like Birla Wallcare Putty, which offers superior smoothness, crack resistance, and waterproofing properties.
3. Incorrect Mixing of Wall Putty
Mistake:
Adding too much or too little water while mixing can affect the consistency. A lumpy or overly thin mixture will not spread evenly and may crack after drying.
Solution:
- Follow the manufacturer’s instructions for the correct water-to-putty ratio.
- Mix thoroughly to achieve a smooth, lump-free paste.
- Let it sit for a few minutes before application.
4. Applying Putty Too Thick or Too Thin
Mistake:
Too thick: Leads to uneven drying, cracks, and wastage.
Too thin: Doesn’t provide adequate coverage and requires multiple coats.
Solution:
- Apply a thin, even layer (1-2 mm) using a steel trowel.
- Let the first coat dry completely before applying a second coat if needed.
5. Not Allowing Proper Drying Time
Mistake:
Applying paint or another coat of putty before the previous layer has fully dried can cause cracks, bubbles, or poor adhesion.
Solution:
- Wait at least 6-8 hours between coats (depending on humidity and temperature).
- Ensure the putty is completely dry before sanding or painting.
6. Ignoring Weather Conditions
Mistake:
Applying wall putty in extreme heat, cold, or high humidity can affect drying and curing.
Solution:
- Avoid applying putty during rainy or very humid weather.
- Ideal application temperature is between 10°C and 35°C.
7. Poor Sanding After Drying
Mistake:
Sanding too harshly or not sanding enough can leave the surface rough or uneven, affecting paint finish.
Solution:
- Use fine-grit sandpaper (250-300 grit) for a smooth finish.
- Sand gently in circular motions after the putty dries.
- Remove dust with a damp cloth before painting.
8. Not Using Waterproof Putty in Moist Areas
Mistake:
Using regular wall putty in bathrooms or kitchens can lead to moisture damage, mold, and peeling.
Solution:
For high-moisture areas, always use Birla Wallcare Putty (waterproof variant) to prevent dampness and ensure long-lasting protection.
9. Uneven Application Leading to Patchy Walls
Mistake:
Inconsistent application leaves some areas thicker than others, resulting in an uneven surface.
Solution:
- Use a trowel or putty knife for uniform spreading.
- Check for smoothness before drying and correct imperfections.
10. Not Storing Putty Properly
Mistake:
Leaving putty bags open or exposed to moisture can make the product unusable.
Solution:
- Seal the bag tightly after use.
- Store in a cool, dry place away from direct sunlight.
Why Choose Birla Wallcare Putty?
Superior whiteness for brighter walls.
Crack-resistant and waterproof.
Smooth finishes for flawless paint adhesion.
Trusted brand with long-lasting durability.
Upgrade Your Walls with Birla Wallcare Putty Today!
Avoid common mistakes and achieve a perfect wall finish with Birla Wallcare Putty. Whether you need regular or waterproof putty, Birla offers the best solution for all your wall care needs.
Get Birla Wallcare Putty now and transform your walls!